Dan Granger
New Member
Hi,
I'm working on re-finishing the wooden centerboard from my recently purchased laser. As can be seen in the picture there is a portion missing from the trailing edge, it is about 8 inches long and 1/2 inch deep. It seems as if there are several schools of thought to this type of repair: either epoxy a new piece of mahogany into the missing space or fill the missing area with epoxy. Does anyone have any opinions about which is the best method?
Thanks!
I'm working on re-finishing the wooden centerboard from my recently purchased laser. As can be seen in the picture there is a portion missing from the trailing edge, it is about 8 inches long and 1/2 inch deep. It seems as if there are several schools of thought to this type of repair: either epoxy a new piece of mahogany into the missing space or fill the missing area with epoxy. Does anyone have any opinions about which is the best method?
Thanks!